Magnetic Lighter Case

A Magnetic Case with Two Body Styles

A magnetic lighter case with a removable cap, a textured grip and an integrated attachment loop. The supplied photos show a green Legend-lettered body paired with a contrasting yellow cap, as well as the magnet attachment points inside the cap and at the base of the main body. The download contains the original Bambu Studio 3MF project in one ZIP archive. It includes a plain body and cap on the first plate and an alternate Legend-lettered body on the second plate. Choose the body style you prefer; separate STL or SolidWorks files are not included. Assembly: use glue to attach the magnets to the main body and the cap, as specified by the creator. Check that the corresponding magnets attract before gluing them in place. The lighter, magnets, glue and any keyring or clip hardware are separate from the printable download. Magnets used by the creator: https://th.aliexpress.com/item/1005013166471758.html The saved project uses PLA, 0.2 mm layers and 15% gyroid infill. Supports are disabled globally, with automatic tree supports enabled for the cap. Compatibility with a particular lighter size or brand is not established by the supplied files. The estimate covers plate 1 only: the plain body and cap, approximately 64 minutes and 15 g using the saved printer profile. The Legend body on plate 2 is an alternative and is excluded from this estimate. Actual time and usage depend on your printer and settings.